Why Carima?



Carima is taking the lead in supplying 3D printer in areas of product manufacturing and R&D through its self-developed equipment/software and is contributing on educating specialists in 3D printing.

High Precision
30um


Micro unit scaffold(X/Y≤50μm) enables high precision output and the z-axis thickness

[IM2(57) standard -30μm]

 

Fast Printing 
20cm/1hr 


Uses 365nm/385nm/405nm UV LED light source
for fast printing.
[IM2 standard - prints 20cm /1 hour]

Reproducibility 
99%


99% light uniformity allows excellent reproducibility.

High Precision
30um

Micro unit scaffold(X/Y≤50μm) enables high precision output and the z-axis thickness(25 μm /50 μm /100 μm /150 μm) prints

smooth and fine surface.

[IM2(57) standard -30μm


Fast Printing
20cm/1hr 


Uses 365nm/385nm/405nm UV LED light source,allowing fast printing.
[IM2 standard - prints 20cm /1 hour(z-axis, 150 μm, Slight deviation by material)


 Reproducibility  
 99% 


99% light uniformity allows excellent reproducibility. 
3D Printer

Carima develops DLP(Digital Light Processing) 
3D printers that cure photocurable liquid resin

with DLP projectors to produce outputs.

Materials

Use Carima resins for precise printing. 

3D Printer

Carima develops DLP (Digital Light Processing) 
3D printers that cure photo curable liquid resins with DLP projectors to produce printouts

Materials

Use carima resins for perfect printing

NEWS

Carima Face Shield

Views 3844




How is Carima responding to COVID-19? 

South Korea was one of the first countries struck with COVID-19 before it spread worldwide. 
To overcome coronavirus pandemic as a community, Carima listened and took action.



Purpose 

The full-face plastic shield protects the wearer’s eyes and prevents the spread of microbes and germs.

Carima’s engineers designed face shields that can be produced with any Carima printer. 
The goal is to print and deliver at least 500 shields to communities in need. Carima, with its fast printing 3D printer, p
ledges to respond to needs and overcome COVID-19 together with all the communities around the world.



Materials in Face Shield 

The shield frame is printed with Carima’s non-toxic CMYK resin. Carima’s CMYK resin,


 inspected and certified PII : 0.2, has been classified as ‘Practically Non-toxic.’ 



Production Process 

 

1. MODELING                                                                2. 3D PRINTING 


 

3. SHIELD FRAME                                                  4. FACE SHIELD



Materials in Face Shield 

Version 1


Version 2



Materials in Face Shield 

  1. Print vertically and add supporters on the bottom of the output for DLP/SLA/LCD printers.
    (z-axis : 155mm)


  2. Start printing.

  3. Use solid and hard to resin to print. ex) tough resin



Assembly Guide

  1. Tie the elastic band in knots.

  2. Place the knot inside the provided hole on both sides of the shield frame..

  3. Wear the elastic band and adjust to fit by tying and untying the knot.

  4. After fitting the elastic band, cut out the rest of the band.

  5. Drill two holes from the middle hole, each 80mm apart.

  6. The hole diameter needs to be 5mm.



Shield Frame Texture                                         

The shield frames are printed with slight texture for the wearer’s convenience

.



Certified Non-toxic Resin                                         

Carima CMYK resin has been tested and certified as a non-toxic resin.





Vesion 1


Version 2


 

Fast Printing
High Precision 
Reproducibility

Carima founded in 2000, is the first 3D printer manufacturer in Korea.

Ready to get started?
Ask us anything.

Join Our Newsletter

Receive the latest news
 and exclusive offers. No spam. 

Tel. +82-2-3663-8877 | Fax. +82-2-3283-4466 | sales@carima.com
Address.  Room 1301~1303, 551-17, Yangcheon-ro, Gangseo-gu, Seoul, 07532, Republic of Korea 


Biz License 109-81-67840